Turn approved artwork into a tattoo stencil
StencilScale is a tattoo stencil maker for artists who already have the design in front of them. Start with a scan, a photo of a pencil drawing, or linework exported from your drawing app. Clean it up, choose the width of the visible artwork, and take a print-sized PDF into your usual printer workflow.
Prepare the linework
- Choose your artwork. Use a JPG, PNG or WebP up to 20 MB. A straight-on, evenly lit photo captures the lines more cleanly. Crop out the desk and the edge of the sheet before importing a phone photo.
- Pick the mode. Start with Clean drawing for a sketch, flash or existing linework. Try Trace edges when you need the outlines of a more shaded reference. Move the ink strength control while checking the preview.
- Review the details. Switch between Artwork and Stencil to check faint lines, shadows and small gaps. Dark filled areas and photo textures may need some cleanup in your drawing app first. The PNG export gives you black linework on a transparent background for that workflow.
Print at the intended size
Enter the final width in millimeters or inches. The tool measures the visible linework after trimming the empty border, then calculates the height at the same aspect ratio. If you want a design to be four inches wide, switch to inches and enter 4. Select the paper size your printer is actually using.
Download the print PDF and open it in your usual PDF viewer or printer app. Select Actual Size or 100%. If the dialog offers Fit, Shrink or a separate scaling setting in the driver, turn that scaling off. Print a plain-paper proof first and measure the 50 mm scale line with a ruler. If it measures differently, check the printing app and driver settings before using transfer paper.
When the artwork exceeds the usable area of one sheet, StencilScale places it on multiple pages at the requested size. The pages are labeled by row and column and share a 6 mm overlap for alignment. At the same width, a tall design may need more sheets than a wide one. Choose the paper size before exporting, then inspect the sheet count and check the first printed sheet before running the rest.
Choose the print orientation
Use Mirror stencil when your workflow requires a reversed file. Check the orientation with a design that has recognizable lettering or a known left and right side. The preview and exports follow the mirror control, so check for a separate mirror setting in your printer app before printing.
A PDF records page and artwork dimensions. A printer driver, mobile print dialog or device can still apply its own scaling. The ruler on the paper proof gives you a direct way to check that final step.
Common questions
Can I turn a photo of my sketch into a tattoo stencil?
Yes. Choose a straight-on JPG, PNG or WebP of the drawing. Start with Clean drawing, then raise ink strength for faint lines or try Trace edges for a shaded reference.
Does the stencil maker upload my artwork?
The file is processed in your browser. The original image, preview and exported stencil stay on the device you use.
How do I print a tattoo stencil at its actual size?
Enter the design width in millimeters or inches and select the paper you loaded. Download the PDF, print at 100% or Actual Size, and measure the 50 mm line on the paper proof.
Can I print a tattoo stencil larger than one sheet?
The PDF divides larger linework across sheets with a labeled 6 mm overlap. Align the corresponding artwork across the shared area. The preview shows the number of sheets before you download.
Which file should I use for printing or editing?
Use the PDF for the physical size you set. Choose the transparent PNG to make more edits in your drawing app.
When should I mirror the stencil?
Turn on Mirror stencil when your printer workflow requires the file to be reversed. The stencil preview, PDF and PNG reflect your selection.